Range Rover Evoque: Programmed position loss

The powered tailgate may lose its position memory if there are multiple object detections or if battery voltage is low. Powered operation may be inhibited. To reset the tailgate; 1. Manually close the tailgate.

2. Press a release switch.

3. Allow the tailgate to power fully open or to the previously set position.

4. Press and release the close switch.

5. Allow the tailgate to power close fully.

The tailgate programmed position memory will now be restored.

READ NEXT:

 Changing the smart key batttery

When the battery needs renewing, there will be a significant decrease in the effective range and the message SMART KEY BATTERY LOW will be displayed in the message centre. To renew the battery:

 Exiting the vehicle

 Locking and arming the alarm

CAUTION: No modifications or additions should be made to the anti-theft system. Such changes could cause the system to malfunction. There are two levels of security: - Single locking. With all d

SEE MORE:

  Fender Apron Panel Front Reinforcement

Removal NOTES: The fender apron panel front reinforcement is manufactured from RP220 and mild steel. The panel is serviced less its weld studs 1. In this procedure, to make sure the vehicle is correctly aligned, it must be placed on an approved alignment jig. 2. The front side member and fender a

  Roof Panel Vehicles Without: Sliding Roof Opening Panel

Removal NOTES: The roof panel is manufactured from aluminium 6111T4. The screw in studs must be renewed with the installation of a new roof panel. 1. The roof panel is replaced in conjunction with: Liftgate Windshield Headliner 2. For additional information relating to this repair procedure p

© 2011-2026 Copyright www.rrevoque.org - 0.004