Range Rover Evoque: Rear view camera
It remains the driver's
responsibility
to detect obstacles and estimate the
vehicle's distance from them when
reversing.
When Reverse (R) is selected the camera provides a wide-angle rear view colour image on the touch screen.
The camera display has priority over the parking aid display. To view the parking aid display instead or to cancel camera display at any time, briefly touch the display.
To adjust the camera settings, touch and hold anywhere on the touch screen to access the user options screen.
The display also incorporates graphic overlays, indicating vehicle direction, width and proximity to surrounding objects.
A. Solid line: The projected path based on current steering wheel position.
B. Dotted line: The safe working width of the vehicle (including exterior mirrors).
C. Tailgate access guideline: Do not reverse beyond this point if tailgate access is required.
D. Parking sensor activation: A coloured area appears, to indicate which rear sensor(s) has been activated.
E. User option. Touch to enable/disable A, B & C.
F. User option. Touch to enable/disable D.
G. User option. Touch to enable/disable Hitch Assist guidance lines.
Some overhanging objects or
barriers
which could cause damage to the
vehicle, may not be detected by the
camera.
READ NEXT:
Park assist
Park assist is a driving aid
only. It
remains the driver's responsibility to
drive with due care and attention
during parking manoeuvres.
Park assist may not detect moving
objects such as chil
System fault
If a system fault is detected, a continuous tone
will sound and a message will be displayed in
the message centre. Contact your Dealer/
Authorised Repairer as soon as possible.
SEE MORE:
Front Shock Absorber Vehicles With: Dynamic
Suspension
General Equipment
Suspension Spring Compressor
Vise
Removal
WARNINGS:
Make sure the spring compressor Safe Working Load (SWL) meets or exceeds
the spring rating quoted in the
Specifcations section.
Always follow the spring compressor manufacturer's instructions.
The spring is under extreme te
Powered tailgate operation
1. Press to open the powered tailgate.
2. Press and release to close the powered
tailgate.
After the tailgate has opened to its set height, it
can be manually raised or lowered. If the
tailgate fails to open or close correctly, close it
manually then press the tailgate release switch
again.
