Range Rover Evoque: Search area
The navigation map database is divided into countries, or geographically defined areas within countries, called search areas. When setting a route, the destination (or waypoint) entered must be in the currently selected search area.
Before attempting to set a destination or waypoint, set the correct search area as follows: - Select Destination entry from the main navigation menu.
- Select page 2 of Destination entry then select Search area.
- Scroll through the list and select the 3 letter code that corresponds to the desired destination area.
- Select OK. The destination entry menu is shown and the information window shows the currently selected search area.
READ NEXT:
Setting a destination
After touching Agree, the initial map screen is
displayed, now select Nav Menu.
From the Navigation Menu, select Destination
entry.
Select Address from the Destination screen
and input the town n
Start guidance
After touching Destination, the system will
calculate the route.
There is now a choice to select 3 Routes,
Change route or to Start navigation guidance.
Touch 3 Routes to display a choice of three
Easy route
In Route options, Easy route can be turned On
or Off.
When On is selected, Easy route changes the
calculation parameters of Route 3 in order to
reduce:
- Junctions.
- Turns.
- Turns that cross
SEE MORE:
Tyre pressures
Never drive your vehicle if
the tyre
pressures are incorrect.
Pressure checks should only be
carried out when the tyres are cold,
and the vehicle has been stationary
for more than three hours. A hot tyre
at, or below, recommended cold
inflation pressure, is dangerously
under-inflated.
If
Tyre change
Valve stem seal, washer, nut,
valve core
and cap should be replaced at every tyre
change. Valve stem seal, washer and
nut must be replaced if valve retention
nut is loosened. Sensor units and nuts
must be refitted using correct torque
figures and associated profile. Damage
to the vehicle m
© 2011-2026 Copyright www.rrevoque.org
