Range Rover Evoque: Automatic systems
Land Rover Range Rover Evoque L538 (2011–2018) Owner's Manual / Hill descent control / Automatic systems
Gradient Acceleration Control (GAC) and Hill Start Assist are not active while HDC is operating.
GAC will limit vehicle acceleration on steep descents, allowing the driver to feel more in control of the vehicle.
Hill Start Assist activates when starting a hill ascent from a stationary position. When the foot brake is released Hill Start Assist smoothly releases the brake pressure, allowing the vehicle to move away without rolling backwards.
Any fault with GAC or Hill Start Assist will be indicated by the DSC warning lamp being illuminated and a message in the message centre.
READ NEXT:
Parking aids
Parking aids
1. Parking aid on/off switch. The switch
indicator will illuminate.
When reverse gear is selected, the front
and rear parking sensors are activated
automatically.
To turn off, pre
Towing
The rear sensors are automatically disabled
when a trailer with an approved electrical
connector is connected.
Note: Trailers fitted with LED lights will not
disable the rear parking aids sensors.
SEE MORE:
Control Diagram, System Operation
Control Diagram
NOTE: A = Hardwired; D = High Speed CAN Bus; O = Local Interconnect
Network (LIN) Bus
CONTROL DIAGRAM - SHEET 1 OF 2
Battery
Starter motor fuse
Battery Junction Box (BJB)
Starter motor
Generator
Transmission Control Module (TCM)
Cooling fan control module
Air Conditioning
Electric
Power Assisted Steering Module (EPAS)
Steering Gear (PSCM)
CAUTION:
Diagnosis by substitution from a donor vehicle is NOT acceptable. Substitution
of control modules does
not guarantee confirmation of a fault, and may also cause additional faults in
the vehicle being tested and/or the donor
vehicle.
NOTES:
If the control
© 2011-2025 Copyright www.rrevoque.org
