Range Rover Evoque: Deselecting valet mode

If Valet mode is active when you enter the vehicle, touch the Valet button to view the Valet mode screen.

Enter your four digit PIN and touch the OK button.

Valet mode is deactivated is displayed.

- The tailgate will return to the previously set security requirement.

- All touch screen functions are enabled.

See 14, SELECTING VALET MODE.

Note: If the PIN number is lost or forgotten, Valet mode can be deactivated only by your Dealer/Authorised Repairer.

READ NEXT:

 Operating the tailgate

Ensure there is minimum space of 1.0M (39 in) above the rear of vehicle before operating the tailgate. Insufficient space may result in damage to the vehicle. Do not operate the tailgate if

 Powered tailgate operation

1. Press to open the powered tailgate. 2. Press and release to close the powered tailgate. After the tailgate has opened to its set height, it can be manually raised or lowered. If the tailgate

 Powered tailgate opening height

The maximum opening height can be set as required. This is useful in parking areas with low ceiling heights or just for ease of use. 1. Open the tailgate to the position which you want to set as t

SEE MORE:

 Evaporative Emissions - GTDi 2.0L Petrol

Evaporative Emissions - Component Location COMPONENT LOCATION ROW Clean air purge 2 hose connection Clean air purge 2 hose Vapor purge 3 hose from purge valve Double check valve Venturi Purge valve Purge hose from charcoal canister Clean air purge hose Clean air purge hose connection with

 Electrical Precautions

General The following guidelines are intended to make sure the safety of the operator whilst preventing damage to the electrical and electronic components of this vehicle. Equipment Prior to commencing any test procedure on the vehicle, make sure that the relevant test equipment is working correct

© 2011-2025 Copyright www.rrevoque.org