Range Rover Evoque: Keyless global closing

To initiate global window closing (if enabled), touch and hold the lock sensor (1) for 3 seconds. This will also single lock the vehicle and activate the alarm.

Note: The windows will close only while the sensor (1) is covered. To fully secure the vehicle, continue to touch the sensor until all windows are fully closed.

READ NEXT:

 Drive-away locking

Drive-away locking automatically locks all doors at a set speed when the vehicle is in motion. This feature can be enabled/disabled via Drive-away locking in the Vehicle Settings menu. See 56, VEH

 Selecting valet mode

Valet mode allows the vehicle to be driven, e.g., by a parking attendant, but leaves the tailgate locked and restricts use of the touch screen. This prevents access to telephone numbers, navigatio

 Interior protection

The interior protection feature of the full alarm system may be temporarily disabled via Alarm sensors in the Vehicle Settings menu. See 56, VEHICLE INFORMATION AND SETTINGS MENU. Note: If the in

SEE MORE:

 Instrument Panel GTDi 2.0L Petrol

Removal NOTE: Removal steps in this procedure may contain installation details. 1. Make the SRS system safe. Refer to: Standard Workshop Practices (100-00 General Information, Description and Operation). 2. Disconnect the battery ground cable. Refer to: Specifications (414-01 Battery, Mounting and

 Battery and Cables AWD

Component Location COMPONENT LOCATION - SHEET 1 OF 2 - DW12c CJB (central junction box) ECM (engine control module) RJB (rear junction box) Battery BJB (battery junction box) Starter motor Generator COMPONENT LOCATION - SHEET 2 OF 2 - GTDi CJB ECM RJB Battery BJB Starter motor Gen

© 2011-2025 Copyright www.rrevoque.org