Range Rover Evoque: Steep slopes

If the vehicle is stationary on a steep, slippery slope, it may begin to slide even with the brakes applied. This is because without wheel rotation, the ABS cannot determine vehicle movement.

To counteract this, briefly release the brakes to allow some wheel rotation. Then re-apply the brakes to allow ABS to gain control.

READ NEXT:

 Emergency brake assist (EBA)

If the driver rapidly applies the brakes, EBA automatically boosts the braking force to its maximum, in order to bring the vehicle to a halt as quickly as possible. If the driver applies the brake

 Electronic brake distribution (EBD)

EBD controls the balance of braking forces supplied to the front and rear wheels, in order to maintain maximum braking efficiency. If the vehicle has a light load (only the driver in the vehicle f

 Electric parking brake (EPD)

The parking brake operates on the rear wheels. Therefore, secure parking of the vehicle is dependent on being on a hard and stable surface. Do not rely on the parking brake to operate effectiv

SEE MORE:

 Front Side Member Section

Removal NOTES: The front side member is manufactured from RP260 and DP600. The front side member section is cut from the front side member and is manufactured from RP260. This procedure is written for the LH front side member section replacement, the LH and RH front side member sections differ i

 Power Steering AWD

Component Location Steering gear Rubber seal assembly Heat shield Overview The vehicle is fitted with EPS (electric power steering), provided by a ZF Servolectric steering gear unit with variable ratio, rack and pinion steering and speed sensitive power assistance. Power assistance is from a

© 2011-2025 Copyright www.rrevoque.org