Range Rover Evoque: Airbag module covers

cleaned Airbag covers should only be cleaned using a slightly dampened cloth, and a small amount of upholstery cleaner.
Any substance which enters the mechanism can prevent correct deployment of an airbag during an impact.

READ NEXT:

 Carpet and mats

Marks or stains can be removed by gentle scrubbing with a weak solution of soap and warm water. For more stubborn stains a commercially available carpet cleaner should be used.

 Instrument panel,touch screen and audio system

Do not use upholstery cleaner on electrical equipment such as fascia switches. When cleaning around electrical equipment such as switches, ensure that fluids do not leak into any gaps around

 Wiper blade replacement

Fit only replacement wiper blades that are identical to the original specification. Before changing a wiper blade, the wiper arms must be set in the ‘service’ position as follows; Note: The Sm

SEE MORE:

 Rain sensor

Ensure that the wipers are switched off before entering a car wash. If the rain sensitive wipers operate during the car washing process, damage may occur to the wiper mechanism. The rain sensor is able to detect the presence and amount of rain/dirt/snow on the windscreen and automatically

 B-Pillar Reinforcement

Removal NOTES: The B-Pillar reinforcement is manufactured from boron steel. The B-Pillar reinforcement is unpicked from the side panel reinforcement, 'ring-frame', it is not serviced separately. There are 2 NVH components serviced on the new B-Pillar reinforcement. 1. The B-Pillar reinforcement i

© 2011-2025 Copyright www.rrevoque.org