Range Rover Evoque: Rear view camera

responsibility It remains the driver's responsibility to detect obstacles and estimate the vehicle's distance from them when reversing.

When Reverse (R) is selected the camera provides a wide-angle rear view colour image on the touch screen.

The camera display has priority over the parking aid display. To view the parking aid display instead or to cancel camera display at any time, briefly touch the display.

To adjust the camera settings, touch and hold anywhere on the touch screen to access the user options screen.

The display also incorporates graphic overlays, indicating vehicle direction, width and proximity to surrounding objects.

A. Solid line: The projected path based on

A. Solid line: The projected path based on current steering wheel position.

B. Dotted line: The safe working width of the vehicle (including exterior mirrors).

C. Tailgate access guideline: Do not reverse beyond this point if tailgate access is required.

D. Parking sensor activation: A coloured area appears, to indicate which rear sensor(s) has been activated.

E. User option. Touch to enable/disable A, B & C.

F. User option. Touch to enable/disable D.

G. User option. Touch to enable/disable Hitch Assist guidance lines.

barriers Some overhanging objects or barriers which could cause damage to the vehicle, may not be detected by the camera.

READ NEXT:

 Park assist

 Park assist

Park assist is a driving aid only. It remains the driver's responsibility to drive with due care and attention during parking manoeuvres. Park assist may not detect moving objects such as chil

 System fault

If a system fault is detected, a continuous tone will sound and a message will be displayed in the message centre. Contact your Dealer/ Authorised Repairer as soon as possible.

SEE MORE:

 Points of interest (POI)

After selecting Points of interest from the menu, touch Name to input the POI name, for example, Petrol to display fuel stations on the map, or touch List for a list of POIs. Alternatively, choose Category to see all categories of POI and make your selection. Use the scroll arrows to change pa

 Fuel Rail

Special Tool(s) 310-198 Installer, Teflon Seal 310-199 Re-shape Tool, Teflon Seal Removal CAUTION: Make sure that all openings are sealed. Use new blanking caps. NOTE: Some variation in the illustrations may occur, but the essential information is always correct. 1. Disconnect the battery ground c

© 2011-2025 Copyright www.rrevoque.org