Range Rover Evoque: Trailer electrical connection

electrical Connect only approved electrical circuits, which are in good condition, to the trailer socket.

The vehicle connector provides a 5 amp output which must not be exceeded. An accessory harness kit increasing output to 15 amp is available from your Land Rover Dealer.

When a trailer electrical connection

When a trailer electrical connection is made and the vehicle’s direction indicators are used, the trailer warning indicator will flash in time with the direction indicators.

READ NEXT:

 Powered tailgate

When towing, ensure there is sufficient clearance before opening or closing the tailgate.

 Parking aids

The rear parking aids sensors are automatically disabled when a trailer with an approved electrical connector is connected. Note: Trailers fitted with LED lights will not disable the rear parking

 Trailer stability assist (TSA)

When a trailer is attached, TSA will automatically detect when a trailer sway is developing. It will then gradually reduce vehicle speed by cutting engine power and applying the brakes to help reg

SEE MORE:

 Information and Message Center

Information and Message Center - Component Location COMPONENT LOCATION Information and Message Center - Overview OVERVIEW The message center is located in the instrument cluster, in a central position between speedometer and the tachometer. The 5 inch Thin Film Transistor (TFT) display can be cont

 Rear Suspension AWD

Component Location RH (right-hand) spring and damper assembly Stabilizer link Stabilizer bar LH (left-hand) spring and damper assembly Wheel knuckle Hub Longitudinal link Rear transverse link Front transverse link Subframe Overview The rear suspension features long travel McPherson stru

© 2011-2025 Copyright www.rrevoque.org