Range Rover Evoque: Diesel glow plug (amber)
Land Rover Range Rover Evoque L538 (2011–2018) Owner's Manual / Warning lamps / Diesel glow plug (amber)
Diesel glow plug (amber)
Illuminates when the ignition is switched on to indicate that the glow plugs are active. Wait until the lamp extinguishes before starting the engine.
READ NEXT:
External temperature (amber)
External temperature (amber)
Illuminates when the external
temperature is low enough that ice
may be present on the road.
Tyre pressure monitoring (yellow)
Tyre pressure monitoring (yellow)
Illuminates briefly when the
ignition is switched on. If the lamp
remains on or illuminates while
driving, one or more tyres are significantly
under-inflated.
Hill descent control (green)
Hill descent control (green)
Illuminates when HDC is selected
and HDC operating conditions are
met. If the lamp flashes, HDC has
been selected, but the operating conditions are
not being met (e
SEE MORE:
Active On-Demand Coupling Vehicles With:
AWF21 6-Speed Automatic Transmission
Removal
1. WARNING: Make sure to support the vehicle with axle stands.
Raise and support the vehicle.
2. Refer to: Exhaust System (309-00B Exhaust System - TD4 2.2L
Diesel, Removal and Installation).
3. CAUTION: Make sure that the driveshaft is
supported with suitable retaining straps.
4. CAUTIONS:
Accessory Drive - GTDi 2.0L Petrol
Torque Specifications
Accessory Drive Belt
Removal
NOTE: Some illustrations may show the engine removed for clarity.
1. Disconnect the battery ground cable.
Refer to: Specifications (414-01 Battery, Mounting and Cables,
Specifications).
2. WARNING: Make sure to support the vehicle with axle stand
© 2011-2025 Copyright www.rrevoque.org
