Range Rover Evoque: Setting a destination
After touching Agree, the initial map screen is displayed, now select Nav Menu.
From the Navigation Menu, select Destination entry.
Select Address from the Destination screen and input the town name.
Once sufficient letters have been entered, touch List to display all the possible towns.
If necessary, use the scroll arrows to the left of the list to search up or down. Select the town you require.
Now enter the road name. Once sufficient letters have been entered, touch List to display all the possible roads.
Select the road you require.
Enter the house number of the address (if known) then touch OK to confirm.
If the house number is not known, press OK - the mid-point of the road is then used as the destination.
The map screen showing the route settings and destination details is displayed.
READ NEXT:
Start guidance
After touching Destination, the system will
calculate the route.
There is now a choice to select 3 Routes,
Change route or to Start navigation guidance.
Touch 3 Routes to display a choice of three
Easy route
In Route options, Easy route can be turned On
or Off.
When On is selected, Easy route changes the
calculation parameters of Route 3 in order to
reduce:
- Junctions.
- Turns.
- Turns that cross
Learn route
In Route options, Learn route can be turned
On or Off.
When On is selected, if you make the same
deviation from the proposed route three times,
then the system will memorise the deviation
and off
SEE MORE:
Starting a disabled vehicle using a starting aid
To start the vehicle using a starting aid or a
slave battery, follow the instructions in the
sequence given.
1. Connect the positive (Red) booster cable to
the positive (+) battery terminal of the
discharged battery.
2. Connect the negative (Black) booster cable
to the vehicle earth point.
3
Stalled adjustment
If seat
movement stops unexpectedly
during adjustment check for any
obstructions and remove.
Once any obstructions have been removed the
seat adjustment mechanism can be reset as
follows.
Operate the button again to continue the stalled
adjustment. When seat movement resumes
hold the butt
