Range Rover Evoque: Suspending and resuming cruise control

Suspend cruise control with a single press of control (3).

To resume cruise control at the previous set speed, press control (2).

if the RES (2) should be used only if the driver is aware of the set speed and intends to return to it.
It is not recommended to resume set speed when a low gear is selected as excessive engine speeds will occur.

READ NEXT:

 Automatic switch off

Cruise control will switch off but the set speed will remain in the memory when: - The CAN button (3) is pressed. - The brake pedal is pressed. - Speed falls below 30km/h (18mph). - Neutral, Park

 Cruise eco data

Diesel only When enabled, a CO2 emission indicator is displayed in the message centre. The higher the numeric reading, the more CO2 is being emitted and the more fuel is being used. See 56, VEH

 Stability control

SEE MORE:

 Locking wheel nuts

Locking wheel nuts can be removed only by using the special adapter provided in the tool kit. Note: When the vehicle is first supplied, the adapter may be stored in the glove compartment. It should be removed and stored in the tool kit as soon as possible. Note: A code number is stamped onto

 Transmission/Transaxle Cooling - Vehicles With: AWF21 6-Speed Automatic Transmission

Transmission Cooling - Component Location COMPONENT LOCATION - STANDARD CLIMATE Transmission fluid cooler COMPONENT LOCATION - HOT CLIMATE Auxiliary transmission fluid cooler Transmission fluid cooler Transmission Cooling - Overview OVERVIEW The AW F21 automatic transmission uses an externa

© 2011-2025 Copyright www.rrevoque.org