Range Rover Evoque: Switching on the ignition

To turn on the ignition without starting the engine:
- Do not depress the brake/clutch pedal, - Press the START/STOP button and hold until the warning lamps illuminate, then release the button.

applied when If the brake/clutch pedal is applied when the start/stop button is pressed, the engine will start.

READ NEXT:

 Engine starting

Never start the engine, or leave it running, when the vehicle is in an enclosed space. Exhaust gasses are poisonous and can cause unconsciousness and death if inhaled. If the engine fails to

 Engine starting: automatic transmission

1. A valid Smart Key must be inside the vehicle. 2. Make sure the gear selector is in P or N. 3. Firmly depress the brake pedal. 4. Press and release the start button. The engine will crank autom

 Engine starting: manual transmission

Note: Do not press the accelerator pedal when starting the engine. 1. A valid Smart Key must be inside the vehicle. 2. Fully depress the clutch pedal. 3. Press and release the start button. For

SEE MORE:

 Daytime Running Lamps (DRL)

Daytime Running Lamps (DRL) Principles of Operation For a detailed description of the Daytime Running Lamps (DRL) and operation, refer to the relevant Description and Operation section. REFER to: Daytime Running Lamps (DRL) (417-04 Daytime Running Lamps (DRL), Description and Operation). Inspecti

 Block Heater

Removal 1. Refer to: Cooling System Partial Draining, Filling and Bleeding (303-03B Engine Cooling - GTDi 2.0L Petrol, General Procedures). 2. Refer to: Engine Undershield (501-02 Front End Body Panels, Removal and Installation). 3. Refer to: Front Bumper Cover (501-19 Bumpers, Removal and Installat

© 2011-2025 Copyright www.rrevoque.org