Range Rover Evoque: Tyre pressure monitoring (yellow)

Tyre pressure monitoring (yellow)
Illuminates briefly when the
ignition is switched on. If the lamp
remains on or illuminates while
driving, one or more tyres are significantly
under-inflated. Stop the vehicle as soon as
possible, check the tyre pressures and inflate
to the recommended pressure.
READ NEXT:
Hill descent control (green)
Illuminates when HDC is selected
and HDC operating conditions are
met. If the lamp flashes, HDC has
been selected, but the operating conditions are
not being met (e
Cruise control active (green)
Illuminates when cruise control is
active.
Side lamps (green)
Illuminates when the side lights are
switched on.
SEE MORE:
Removal
NOTES:
The fender apron panel front reinforcement is manufactured from RP220 and
mild steel.
The panel is serviced less its weld studs
1. In this procedure, to make sure the vehicle is correctly aligned, it must
be placed on an
approved alignment jig.
2. The front side member and fender a
Removal
NOTES:
Within this procedure there are 2 different options depending on type of
vehicle body and combination of replacement panels.
The quarter panel is manufactured from mild steel.
The rocker panel butt joint in option 2 must be MIG brazed due to the location
of boron reinforcements.
© 2011-2025 Copyright www.rrevoque.org
