Range Rover Evoque: Mirror dip when reversing
If the vehicle is equipped with memory seats, when reverse gear is selected the door mirrors can be set to automatically adjust, providing an improved viewing angle of the curb side for reversing. The Reverse-dip mirror feature must be switched on. See 56, VEHICLE INFORMATION AND SETTINGS MENU.
The exact dipped position can be adjusted while the mirrors are dipped; 1. With the ignition on, select reverse gear.
2. With the mirror adjust controls, adjust to the desired dip position.
3. Select neutral (N) gear. This will store your setting for future use.
The next time reverse is selected, the newly adjusted position will be selected.
When the gear selector is moved out of reverse, the mirrors will return to their previous position.
Note: If vehicle speed exceeds 7km/h (4mph) in reverse, the mirrors will return to their normal driving position for enhanced visibility.
READ NEXT:
Interior mirror
Auto dimming mirror
1. Ambient light sensor.
2. High beam assist sensor.
Interior mirror dimming will adjust
automatically according to the amount of
ambient light when the ignition is on. If r
Blind spot monitor
The Blind
Spot Monitor (BSM) system
is a supplement to, not a replacement
for, a safe driving style and use of the
exterior and rear-view mirrors.
Please note that BSM may not be able
to give
SEE MORE:
Rear wiper
If reverse gear is selected while the front
wipers are operating, the rear wiper will start
automatically and continue as long as reverse
gear is selected. The wipe interval is dependent
on the front wipers setting.
If reverse gear is selected while the rear wiper
control is in the INT positio
Rear Side Member Lower Side Extension
Removal
NOTE: The rear side member lower side extension is manufactured from mild
steel.
1. The rear side member lower side extension is replaced in
conjunction with:
Rear bumper cover
Rear bumper
Rear lamp mounting panel
2. For additional information relating to this repair procedure please
