Range Rover Evoque: Park

Use when the vehicle is parked. The transmission will be locked.

should be Park (P) or Neutral (N) should be engaged and the parking brake applied when the vehicle is stationary.
Always select P and switch off the ignition before leaving the vehicle.

the vehicle Never select Park (P) when the vehicle is in motion.

READ NEXT:

 Reverse gear

Never select Reverse (R) when the vehicle is in forward motion. Before selecting reverse gear, ensure the vehicle is stationary and the brakes are applied. Rotate to R.

 Neutral

Disconnects drive to the wheels. Use the parking brake while N is selected. Do not use for vehicle recovery purposes.

 Drive

Never select a forward gear when the vehicle is in rearward motion. Gear changing is fully automatic. Shift points are determined by accelerator pedal position and current road speed.

SEE MORE:

 Clockspring

Removal CAUTION: Make sure that the road wheels are in the straight ahead position. NOTE: Removal steps in this procedure may contain installation details. 1. Make the SRS system safe. Refer to: Standard Workshop Practices (100-00 General Information, Description and Operation). 2. Refer to: Stee

 Front Suspension - Component Location, System Operation and Component Description

Component Location RH (right-hand) spring and damper assembly Stabilizer bar link Stabilizer bar LH (left-hand) spring and damper assembly Wheel knuckle Hub and bearing assembly Lower control arm Subframe Overview The front suspension features long travel McPherson struts to optimize on a

© 2011-2025 Copyright www.rrevoque.org