Range Rover Evoque: Touch screen remote control

Touch screen remote control
Touch screen remote control

1. Press here to undock remote control.

screen to Do not press the touch screen to undock the remote control.

2. Touch screen.

3. Home screen.

4. Video source select.

5. Audio source select.

6. Right screen select.

7. Right screen tell-tale. (illuminates when right screen has been selected).

8. Cursor movement and option select buttons.

9. Left screen tell-tale. (illuminates when left screen has been selected).

10. Left screen select.

11. Screen brightness - decrease.

12. Screen brightness - increase.

13. RSE settings.

READ NEXT:

 Using the system

The system is operated using the remote control. To release the remote from the docked position, press at the top of the remote (1) to unlatch it. Do not attempt to pull the remote control ou

 Headphones

The volume control for each set of headphones is adjusted on the headphones. Press the channel selector button to cycle through available channels. Select the channel appropriate for the required

 Remote control battery

The remote control battery is automatically recharged while the remote is docked. The battery is not serviceable and should not be changed or removed by the user.

SEE MORE:

 Daytime running lamps

Daytime running lamps are LED lamps. With the lighting control in the OFF position or in AUTO position while lighting conditions do not require headlamps on, then daytime running lamps will switch on automatically under the following conditions: - The engine is running. - The gear selector is

 A-Pillar Reinforcement

Removal NOTES: The A- Pillar reinforcement is manufactured from DP600, it is serviced with its upper and lower door hinge mounting brackets. The A-Pillar reinforcement is unpicked from the side panel reinforcement 'ring-frame', it is not serviced separately. If the A-pillar reinforcement is dama

© 2011-2025 Copyright www.rrevoque.org