Range Rover Evoque manuals

Range Rover Evoque: Body Repairs - Vehicle Specific Information and Tolerance Checks

Land Rover Range Rover Evoque L538 (2011–2018) Service Manual / Body and Paint / Body Repairs - Vehicle Specific Information and Tolerance Checks

Body and Frame

Front End Body Dimensions

NOTES:

All dimensions shown are in millimetres (mm).

Dimensions shown to holes, are always taken from/to the hole centre. They are also always to the body panel surface, not to the top of bolts or components.

Range Rover Evoque. Body Repairs - Vehicle Specific Information and Tolerance Checks

Range Rover Evoque. Body Repairs - Vehicle Specific Information and Tolerance Checks

Range Rover Evoque. Body Repairs - Vehicle Specific Information and Tolerance Checks

Range Rover Evoque. Body Repairs - Vehicle Specific Information and Tolerance Checks

Range Rover Evoque. Body Repairs - Vehicle Specific Information and Tolerance Checks

Range Rover Evoque. Body Repairs - Vehicle Specific Information and Tolerance Checks

Side Panel Dimensions

3-door version

Range Rover Evoque. Body Repairs - Vehicle Specific Information and Tolerance Checks

Range Rover Evoque. Body Repairs - Vehicle Specific Information and Tolerance Checks

5-door version

Range Rover Evoque. Body Repairs - Vehicle Specific Information and Tolerance Checks

Range Rover Evoque. Body Repairs - Vehicle Specific Information and Tolerance Checks

3-door version

Range Rover Evoque. Body Repairs - Vehicle Specific Information and Tolerance Checks

Range Rover Evoque. Body Repairs - Vehicle Specific Information and Tolerance Checks

5-door version

Range Rover Evoque. Body Repairs - Vehicle Specific Information and Tolerance Checks

Range Rover Evoque. Body Repairs - Vehicle Specific Information and Tolerance Checks

Range Rover Evoque. Body Repairs - Vehicle Specific Information and Tolerance Checks

Range Rover Evoque. Body Repairs - Vehicle Specific Information and Tolerance Checks

Rear End Body Dimensions

Range Rover Evoque. Body Repairs - Vehicle Specific Information and Tolerance Checks

Range Rover Evoque. Body Repairs - Vehicle Specific Information and Tolerance Checks

Range Rover Evoque. Body Repairs - Vehicle Specific Information and Tolerance Checks

Range Rover Evoque. Body Repairs - Vehicle Specific Information and Tolerance Checks

Under Body Dimensions

Range Rover Evoque. Body Repairs - Vehicle Specific Information and Tolerance Checks

Range Rover Evoque. Body Repairs - Vehicle Specific Information and Tolerance Checks

Range Rover Evoque. Body Repairs - Vehicle Specific Information and Tolerance Checks

Range Rover Evoque. Body Repairs - Vehicle Specific Information and Tolerance Checks

Gap and Profile measurements

The following information is to be used as a guide to assist the technician in installing exterior body panels and trim items so as to achieve a correctly aligned and cosmetically acceptable vehicle.

NOTE: All dimensions shown are in millimetres (mm).

Range Rover Evoque. Body Repairs - Vehicle Specific Information and Tolerance Checks

Range Rover Evoque. Body Repairs - Vehicle Specific Information and Tolerance Checks

Range Rover Evoque. Body Repairs - Vehicle Specific Information and Tolerance Checks

Range Rover Evoque. Body Repairs - Vehicle Specific Information and Tolerance Checks

Range Rover Evoque. Body Repairs - Vehicle Specific Information and Tolerance Checks

Range Rover Evoque. Body Repairs - Vehicle Specific Information and Tolerance Checks

Range Rover Evoque. Body Repairs - Vehicle Specific Information and Tolerance Checks

Range Rover Evoque. Body Repairs - Vehicle Specific Information and Tolerance Checks

READ NEXT:

 Front End Sheet Metal Repairs

 Front Bumper Mounting

Removal NOTE: The front bumper mounting is manufactured from HSLA300 and mild steel. 1. In this procedure, to make sure the vehicle is correctly aligned, it must be placed on an approved alignment j

 Front Side Member

Removal NOTES: The front side member is manufactured from RP260 and DP600. The front side member long section is cut from the front side member and is manufactured from RP260. The service panel is

SEE MORE:

 Liftgate Window Glass

Removal 1. Refer to: Rear Spoiler (501-08 Exterior Trim and Ornamentation, Removal and Installation). 2. 3. 4. CAUTION: The step must be carried out on both sides. 5. CAUTIONS: Protect the surrounding components. Protect the surrounding paintwork to avoid damage. Use a glazing cutting wire to

 Air Conditioning

Component Location COMPONENT LOCATION High pressure line Low pressure servicing connection High pressure servicing connection Thermostatic expansion valve Evaporator Refrigerant pressure sensor Receiver/Drier Condenser A/C (air conditioning) compressor Low pressure line COMPONENT LOCATI

© 2011-2025 Copyright www.rrevoque.org