Range Rover Evoque: Disabling stop/start
Land Rover Range Rover Evoque L538 (2011–2018) Owner's Manual / Starting the engine / Disabling stop/start
Disabling stop/start
To switch the system off (preventing automatic stop/start) press the ECO switch. The LED indicator will extinguish to confirm that the system is off.
Note: The engine will restart automatically If the switch is pressed to disable the system, while an automatic engine stop is in progress.
If the LED indicator fails to illuminate at start up, a system fault may be present. Contact your Land Rover dealer for assistance.
READ NEXT:
Eco stall recovery
In the event that the engine stalls, it can be
restarted by fully depressing the clutch pedal.
Note: Automatic stall restart will only operate
once. If the engine is stalled a second time the
engi
Emission control system
Land Rover vehicles are fitted with emission
and evaporative control systems. In many
countries it is unlawful to tamper, modify or
replace such equipment and legal penalties
apply if the laws are
Diesel particulate filter (DPF)
Diesel vehicles equipped with a particulate filter
have more efficient emission control. The
particles in the exhaust gases are collected in
the filter during normal driving.
When a DPF message is
SEE MORE:
Wading
The maximum advisable wading depth is
500mm (19.7in). If the vehicle remains
stationary in water above the door sill level,
severe electrical damage may occur.
Do not switch off the engine when
wading and avoid stopping. If the
engine stalls, restart immediately.
If water has entered the en
Hydraulic Brake Actuation
Hydraulic Brake Actuation LHD AWD/RHD AWD - Component Location
NOTE: RHD (right-hand drive) installation shown, LHD (left-hand drive)
installation similar.
COMPONENT LOCATION
Brake pedal
Hydraulic pipes
Integrated HCU (hydraulic control unit) and ABS (anti-lock brake system)
module
Brake ma
© 2011-2025 Copyright www.rrevoque.org
