Range Rover Evoque: Park

Use when the vehicle is parked. The transmission will be locked.

should be Park (P) or Neutral (N) should be engaged and the parking brake applied when the vehicle is stationary.
Always select P and switch off the ignition before leaving the vehicle.

the vehicle Never select Park (P) when the vehicle is in motion.

READ NEXT:

 Reverse gear

Never select Reverse (R) when the vehicle is in forward motion. Before selecting reverse gear, ensure the vehicle is stationary and the brakes are applied. Rotate to R.

 Neutral

Disconnects drive to the wheels. Use the parking brake while N is selected. Do not use for vehicle recovery purposes.

 Drive

Never select a forward gear when the vehicle is in rearward motion. Gear changing is fully automatic. Shift points are determined by accelerator pedal position and current road speed.

SEE MORE:

 Multifunction Electronic Modules

Torque Specifications Front Door Module (FDM) Removal NOTE: Removal steps in this procedure may contain installation details. 1. Disconnect the battery ground cable. Refer to: Specifications (414-01 Battery, Mounting and Cables, Specifications). 2. Refer to: Front Door Trim Panel (501-05 Interior

 Rear Wheelhouse Outer

Removal NOTES: It is necessary to remove the inner quarter panel to enable removal and installation of the rear wheelhouse outer. The rear wheelhouse outer is manufactured from mild steel. This method describes the LH rear wheelhouse outer, the RH side is similar. 1. The rear wheelhouse outer is

© 2011-2025 Copyright www.rrevoque.org