Range Rover Evoque: Radiator

Removal

NOTES:

Removal steps in this procedure may contain installation details.

Some variation in the illustrations may occur, but the essential information is always correct.

1. WARNING: Make sure to support the vehicle with axle stands. Raise and support the vehicle.

2. Refer to: Cooling System Partial Draining, Filling and Bleeding (303-03B Engine Cooling - GTDi 2.0L Petrol, General Procedures).

3. Refer to: Air Conditioning (A/C) System Recovery, Evacuation and Charging - GTDi 2.0L Petrol (412-00 Climate Control System - General Information, General Procedures).

4. Refer to: Condenser - GTDi 2.0L Petrol (412-01 Climate Control, Removal and Installation).

5. Torque: 5 Nm

Range Rover Evoque. Engine Cooling - GTDi 2.0L Petrol

6.

Range Rover Evoque. Engine Cooling - GTDi 2.0L Petrol

7.

Range Rover Evoque. Engine Cooling - GTDi 2.0L Petrol

8. Torque: 5 Nm

Range Rover Evoque. Engine Cooling - GTDi 2.0L Petrol

9.

Range Rover Evoque. Engine Cooling - GTDi 2.0L Petrol

10.

Range Rover Evoque. Engine Cooling - GTDi 2.0L Petrol

11. CAUTION: Take extra care not to damage the component.

Range Rover Evoque. Engine Cooling - GTDi 2.0L Petrol

12. NOTE: Do not disassemble further if the component is removed for access only.

Range Rover Evoque. Engine Cooling - GTDi 2.0L Petrol

13. Torque: 3 Nm

Range Rover Evoque. Engine Cooling - GTDi 2.0L Petrol

14. NOTE: This step is only required if a new component is installed.

Range Rover Evoque. Engine Cooling - GTDi 2.0L Petrol

15.

Range Rover Evoque. Engine Cooling - GTDi 2.0L Petrol

Installation

1. To install, reverse the removal procedure.

READ NEXT:

 Cooling Fan

Removal NOTES: Removal steps in this procedure may contain installation details. Some variation in the illustrations may occur, but the essential information is always correct. 1. WARNING: Make sure

 Cooling System Partial Draining, Filling and Bleeding

Draining CAUTIONS: The engine cooling system must be maintained with the correct concentration and type of anti-freeze solution to prevent corrosion and frost damage. Failure to follow this instructi

 Engine Cooling - Diagnosis and Testing

Principles of Operation For a detailed description of the cooling system, refer to the relevant Description and Operation section in the workshop manual. REFER to: (303-03B Engine Cooling - GTDi 2.0L

SEE MORE:

 Selecting valet mode

Valet mode allows the vehicle to be driven, e.g., by a parking attendant, but leaves the tailgate locked and restricts use of the touch screen. This prevents access to telephone numbers, navigation addresses and audio system settings. From the Home menu, select Valet: Enter a four digit Perso

 Limitation of liability

Ordnance Survey does not warrant or represent that any of the Code-Point data is accurate, error-free or suitable for your purposes. In no event shall OS or the supplier of the Navigation System using the OS Code-Point data be liable for any consequential, special, incidental or indirect dama

© 2011-2025 Copyright www.rrevoque.org