Range Rover Evoque: Rear view camera

responsibility It remains the driver's responsibility to detect obstacles and estimate the vehicle's distance from them when reversing.

When Reverse (R) is selected the camera provides a wide-angle rear view colour image on the touch screen.

The camera display has priority over the parking aid display. To view the parking aid display instead or to cancel camera display at any time, briefly touch the display.

To adjust the camera settings, touch and hold anywhere on the touch screen to access the user options screen.

The display also incorporates graphic overlays, indicating vehicle direction, width and proximity to surrounding objects.

A. Solid line: The projected path based on

A. Solid line: The projected path based on current steering wheel position.

B. Dotted line: The safe working width of the vehicle (including exterior mirrors).

C. Tailgate access guideline: Do not reverse beyond this point if tailgate access is required.

D. Parking sensor activation: A coloured area appears, to indicate which rear sensor(s) has been activated.

E. User option. Touch to enable/disable A, B & C.

F. User option. Touch to enable/disable D.

G. User option. Touch to enable/disable Hitch Assist guidance lines.

barriers Some overhanging objects or barriers which could cause damage to the vehicle, may not be detected by the camera.

READ NEXT:

 Park assist

 Park assist

Park assist is a driving aid only. It remains the driver's responsibility to drive with due care and attention during parking manoeuvres. Park assist may not detect moving objects such as chil

 System fault

If a system fault is detected, a continuous tone will sound and a message will be displayed in the message centre. Contact your Dealer/ Authorised Repairer as soon as possible.

SEE MORE:

 Interior mirror

Auto dimming mirror 1. Ambient light sensor. 2. High beam assist sensor. Interior mirror dimming will adjust automatically according to the amount of ambient light when the ignition is on. If reverse gear is selected, the automatic dimming feature is turned off to allow maximum visibility

 Front Suspension - Component Location, System Operation and Component Description

Component Location RH (right-hand) spring and damper assembly Stabilizer bar link Stabilizer bar LH (left-hand) spring and damper assembly Wheel knuckle Hub and bearing assembly Lower control arm Subframe Overview The front suspension features long travel McPherson struts to optimize on a

© 2011-2025 Copyright www.rrevoque.org