Range Rover Evoque: Using cruise control

Using cruise control
1. Set target speed, or increase speed.
2. RES. Resume set speed.
3. CAN. Suspends cruise control operation
without erasing memorised speed.
4. Decrease set speed.
Note: Cruise control is not available when
using Hill Descent Control or when a Terrain
Response special program has been selected.
Note: Do not use cruise control when driving
off-road.
READ NEXT:
When setting the cruise
control to the
speed limit, it is important to remember
that it is possible for the vehicle speed
to increase when travelling downhill.
This may result in the vehicle sp
To reduce cruising speed, press and hold
control (4). Release the switch when the
desired speed is reached, the new speed will be
set and maintained.
The set speed can be decreased in steps of
2k
Suspend cruise control with a single press of
control (3).
To resume cruise control at the previous set
speed, press control (2).
RES (2) should be used only
if the
driver is aware of the set
SEE MORE:
Removal
CAUTIONS:
Make sure that the wiring harness is not twisted or damaged on removal. Failure
to follow this instruction may result
in damage to the vehicle.
Take extra care not to damage the wiring harness clips.
NOTES:
Some variation in the illustrations may occur, but the essential informa
Daytime Running Lamps (DRL)
Principles of Operation
For a detailed description of the Daytime Running Lamps (DRL) and operation,
refer to the relevant Description and
Operation section.
REFER to: Daytime Running Lamps (DRL) (417-04 Daytime Running Lamps (DRL),
Description and Operation).
Inspecti
© 2011-2025 Copyright www.rrevoque.org
