Range Rover Evoque: Underbody maintenance

Regularly flush the underbody with plain water, and pay particular attention to areas where mud and debris collect.

If damage or corrosion are detected, have the vehicle checked by your Dealer/Authorised Repairer as soon as possible.

READ NEXT:

 Cleaning after off-road driving

Ensure that the areas around air intakes and the front grille are clean and clear of debris. Pay particular attention to the lower grille and radiator. Failure to do so may cause the engine t

 Glass surfaces

Clean the rear window with a soft cloth to avoid damaging the heating element. Do not scrape the glass or use any abrasive cleaning fluid. Mirror glass is particularly susceptible to damage. Wash

 Cleaning the rear screen

To avoid damaging the heating elements when cleaning the inside of the rear screen, use only a soft damp cloth or chamois leather. Do not use solvents or sharp objects to clean the glass.

SEE MORE:

 Cylinder Block Components - 2.0L GTDi

Component Description Front crankshaft oil seal Front cover assembly Knock sensor - cylinders 1 and 2 Gasket - thermostat housing Thermostat Cylinder block Knock sensor - cylinders 3 and 4 Bolt (2 off) Bolt (3 off) Oil pump Gasket - oil pump inlet Oil pump filter and pick-up assembly

 Transmission Description - System Operation and Component Description

Control Diagram NOTE: A = Hardwired; D = High Speed Controller Area Network (CAN) bus; O = Local Interconnect Network ( LIN) Battery Battery Junction Box (BJB) Engine Control Module (ECM) Central Junction Box (CJB) Transmission paddle switches Clockspring Auxiliary battery module Transmis

© 2011-2025 Copyright www.rrevoque.org