Range Rover Evoque: Diesel glow plug (amber)
Land Rover Range Rover Evoque L538 (2011–2018) Owner's Manual / Warning lamps / Diesel glow plug (amber)
Diesel glow plug (amber)
Illuminates when the ignition is switched on to indicate that the glow plugs are active. Wait until the lamp extinguishes before starting the engine.
READ NEXT:
External temperature (amber)
External temperature (amber)
Illuminates when the external
temperature is low enough that ice
may be present on the road.
Tyre pressure monitoring (yellow)
Tyre pressure monitoring (yellow)
Illuminates briefly when the
ignition is switched on. If the lamp
remains on or illuminates while
driving, one or more tyres are significantly
under-inflated.
Hill descent control (green)
Hill descent control (green)
Illuminates when HDC is selected
and HDC operating conditions are
met. If the lamp flashes, HDC has
been selected, but the operating conditions are
not being met (e
SEE MORE:
Wheel changing safety
Before raising the vehicle or changing a wheel,
ensure that you read and comply with the
following warnings.
Always find a safe place to
stop, off
the highway and away from traffic.
Ensure that the vehicle and jack are
both on firm level ground.
Apply the parking brake. Engage Park
(P) on
Intake Manifold
Removal
NOTES:
Removal steps in this procedure may contain installation details.
Some illustrations may show the engine removed for clarity.
1. WARNING: Make sure to support the vehicle with axle stands.
Raise and support the vehicle.
2. Disconnect the battery ground cable.
Refer to: Specification
© 2011-2025 Copyright www.rrevoque.org
