Range Rover Evoque: Memory seats
Front seat positions can be saved to vehicle memory.
Once you have adjusted the power operated driver’s seat and the exterior mirrors, the vehicle can memorise the settings for future use. See 48, EXTERIOR MIRRORS.
1. On the driver’s seat, press the memory store button to activate the memory function. The switch indicator will illuminate.
2. Press one of the preset buttons within 5 seconds to memorise the current settings.
Memory (1, 2 or 3) Settings Saved will be displayed on the message centre, accompanied by an audible chime to confirm the settings have been saved to memory.
Note: A seat position will be saved to memory only during the 5 second active period.
Note: Any existing settings will be over-written when a new position is saved to memory.
To recall a saved position, press the relevant preset button (2). Memory (1, 2 or 3) Recalled will be displayed in the message centre.
For the passenger seat of a Coupe model, press the memory button to store the current settings. If the seat adjustment is subsequently changed, press the memory button to restore the original settings.
READ NEXT:
Easy entry/exit
When Easy entry/exit is configured, the driver’s
seat will automatically lower when the ignition
is switched off and the door release lever is
used. Upon returning to the vehicle, when the
drive
Head restraints
Adjust the head restraint so
that the
top of the head restraint is above the
centre line of the head. An incorrectly
adjusted head restraint increases the
risk of death or serious injury in the
Integrated head restraints
Models with ‘sports’ seats have non adjustable
and non removable head restraints.
SEE MORE:
Driving Modes
A number of different driving modes are available. Some can be selected by
the driver and some are automatically initiated
by the TCM to adapt to different driving conditions.
Normal
Sports
Manual 'CommandShift'
Cooling
Hill Descent Control (HDC)
Cruise
Limp home
Coast
Fast off recognitio
Rocker Panel Inner Reinforcement
Removal
NOTES:
The rocker panel inner reinforcement is manufactured from boron steel.
The rocker panel inner reinforcement is unpicked from the side panel
reinforcement 'ring-frame', it is not serviced separately.
In this procedure the b-pillar reinforcement will be fitted in combination with
th
