Range Rover Evoque: Central Junction Box (CJB)

Removal

CAUTIONS:

If a new component is to be installed, the Land Rover approved diagnostic equipment must be connected prior to removal, the data must then be downloaded from it and the keys (remote control handsets) set into default mode. Failure to follow this instruction will result in permanent damage to the keys.

A maximum of 4 remote transmitters can be programmed to the anti-theft alarm and double locking module.

Programming for all remote transmitters must be carried out at the same time.

NOTES: Removal steps in this procedure may contain installation details.

Make sure that all keys (remote control handsets) are present when performing this procedure.

1. If a new Central Junction Box (CJB) is to be installed, use Land Rover approved equipment to upload the stored data.

2. Refer to: Specifications (414-01 Battery, Mounting and Cables, Specifications).

3. Refer to: Glove Compartment (501-12 Instrument Panel and Console, Removal and Installation).

4.

Range Rover Evoque. Module Communications Network

5.

Range Rover Evoque. Module Communications Network

6.

Range Rover Evoque. Module Communications Network

7.

Range Rover Evoque. Module Communications Network

8. Torque: 8 Nm

Range Rover Evoque. Module Communications Network

9.

Range Rover Evoque. Module Communications Network

Installation

1. To install, reverse the removal procedure.

READ NEXT:

 Battery Junction Box (BJB) TD4 2.2L Diesel

Removal NOTES: Removal steps in this procedure may contain installation details. Some variation in the illustrations may occur, but the essential information is always correct. All vehicles 1. Refer

 Battery Junction Box (BJB) GTDi 2.0L

Removal NOTES: Removal steps in this procedure may contain installation details. Some variation in the illustrations may occur, but the essential information is always correct. All vehicles 1. Refer

 Communications Network - Overview, System Operation and Component Description

Overview A number of different types of communication networks are incorporated into the vehicle wiring harnesses for the transmission of commands and information between control modules. The config

SEE MORE:

 Accessing navigation

From the Home menu touch the On road nav soft key. Alternatively press the NAV hard key on the facia. A caution screen will be displayed. If the navigation screen language has not been set, now is the time to set it. Select Language, make a selection and confirm it by touching the OK soft key.

 Towing the vehicle on four wheels

If the vehicle battery is disconnected or disabled, do NOT attempt to tow the vehicle. Towing may result in serious damage to the transmission. The vehicle should NOT be towed on all four wheels. However, if the vehicle cannot be recovered by using the correct method, please adhere to the

© 2011-2025 Copyright www.rrevoque.org