Range Rover Evoque: Deselecting valet mode
Land Rover Range Rover Evoque L538 (2011–2018) Owner's Manual / Entering the vehicle / Deselecting valet mode
If Valet mode is active when you enter the vehicle, touch the Valet button to view the Valet mode screen.
Enter your four digit PIN and touch the OK button.
Valet mode is deactivated is displayed.
- The tailgate will return to the previously set security requirement.
- All touch screen functions are enabled.
See 14, SELECTING VALET MODE.
Note: If the PIN number is lost or forgotten, Valet mode can be deactivated only by your Dealer/Authorised Repairer.
READ NEXT:
Operating the tailgate
Ensure there is minimum space
of 1.0M
(39 in) above the rear of vehicle before
operating the tailgate. Insufficient space
may result in damage to the vehicle.
Do not operate the tailgate
if
Powered tailgate operation
1. Press to open the powered tailgate.
2. Press and release to close the powered
tailgate.
After the tailgate has opened to its set height, it
can be manually raised or lowered. If the
tailgate
Powered tailgate opening height
The maximum opening height can be set as
required. This is useful in parking areas with
low ceiling heights or just for ease of use.
1. Open the tailgate to the position which you
want to set as t
SEE MORE:
Selecting valet mode
Valet mode allows the vehicle to be driven, e.g.,
by a parking attendant, but leaves the tailgate
locked and restricts use of the touch screen.
This prevents access to telephone numbers,
navigation addresses and audio system
settings.
From the Home menu, select Valet:
Enter a four digit Perso
Sulphur content
If your vehicle is fitted
with a Diesel
Particulate Filter (DPF) the maximum
Sulphur content must not exceed
0.005%. Using an incorrect fuel will
cause serious damage to the DPF.
The Sulphur content of diesel used in Land
Rover vehicles should not exceed 0.3% (3000
parts per million).
In
© 2011-2025 Copyright www.rrevoque.org
