Range Rover Evoque: Using the system
The system is operated using the remote
control.
To release the remote from the docked
position, press at the top of the remote (1) to
unlatch it.
Do not attempt to pull the
remote
control out of its docked position.

Using the appropriate button (6) or (10) or on
screen soft key (right or left) to select the
required screen, will allow options to be set
and selected.
Note: A help screen is available from each
screen/menu. To view the help screen for
guidance on the available functions and
options, touch the question mark (?) icon.

READ NEXT:
The volume control for each set of headphones
is adjusted on the headphones.
Press the channel selector button to cycle
through available channels. Select the channel
appropriate for the required
The remote control battery is automatically
recharged while the remote is docked. The
battery is not serviceable and should not be
changed or removed by the user.
SEE MORE:
Connect. Use to send or accept
a call and access last 10 dialled
numbers.
Disconnect. Use to end or reject
a call.
No phone connected.
Phone signal strength indicator.
Phone battery level indicator.
Bluetooth. Indicates that a
Bluetooth® device is
connected.
Tick. Indicates
If one of the sensors is completely obscured
the BSM system is automatically disabled, the
warning indicator dot is displayed in the
exterior mirror and the message BSM sensor
blocked appears in the message centre.
Note: Blockage testing is only initiated when
vehicle speed is above 32km/h (20
© 2011-2025 Copyright www.rrevoque.org
