Range Rover Evoque: Trailer levelling

To maintain vehicle stability, it is essential that the trailer is loaded so that it remains parallel to the ground. This is particularly important when towing twin axled trailers.

Vssential towing checks

READ NEXT:

 Trailer electrical connection

Connect only approved electrical circuits, which are in good condition, to the trailer socket. The vehicle connector provides a 5 amp output which must not be exceeded. An accessory harness ki

 Powered tailgate

When towing, ensure there is sufficient clearance before opening or closing the tailgate.

 Parking aids

The rear parking aids sensors are automatically disabled when a trailer with an approved electrical connector is connected. Note: Trailers fitted with LED lights will not disable the rear parking

SEE MORE:

 Cooling Fan

Removal NOTES: Removal steps in this procedure may contain installation details. Some variation in the illustrations may occur, but the essential information is always correct. 1. WARNING: Make sure to support the vehicle with axle stands. Raise and support the vehicle. 2. Refer to: Cooling System

 Spring Vehicles Without: Dynamic Suspension

Removal WARNINGS: Make sure the spring compressor Safe Working Load (SWL) meets or exceeds the spring rating quoted in the Specifcations section. Always follow the spring compressor manufacturer's instructions. The spring is under extreme tension, care must be taken at all times. Failure to foll

© 2011-2025 Copyright www.rrevoque.org