Range Rover Evoque: Using the touch screen
Always run the engine during
prolonged
use of the touch screen. Failure to do so
may discharge the vehicle battery,
preventing the engine from starting.
Avoid spilling or splashing liquids onto
the touch screen.
Switching on
- Switch on the ignition.
- Switch on the touch screen.
The most recently used audio source
controls will be displayed (e.g. Radio, CD
etc.).
- Select HOME MENU.
- Select a source.
Note: Available sources will depend upon
options selected at time of purchase.
READ NEXT:
Some touch screen display icons are displayed
on subsequent screens and may not all be
displayed at the same time, e.g.
Back soft key: Touch to return to
the previous screen displayed.
Some menus and control screens will appear
as pop-ups, overlaying the current screen.
Warning and information pop-ups may also
appear on the display. Take notice of any
warnings and follow any on-
Press the hard key at any time to move from
the current display to the Home menu.
SEE MORE:
Removal
CAUTIONS:
Make sure that the wiring harness is not twisted or damaged on removal. Failure
to follow this instruction may result
in damage to the vehicle.
Take extra care not to damage the wiring harness clips.
NOTE: Removal steps in this procedure may contain installation details.
1. Disc
Brake fluid will damage
painted
surfaces. Soak up any spillage with an
absorbent cloth immediately and wash
the area with a mixture of car shampoo
and water.
Only use new fluid from an airtight
container (fluid from open containers or
fluid previously bled from the system,
will have absor
© 2011-2025 Copyright www.rrevoque.org
