Range Rover Evoque: Easy entry/exit

When Easy entry/exit is configured, the driver’s seat will automatically lower when the ignition is switched off and the door release lever is used. Upon returning to the vehicle, when the driver’s door is closed and the seat belt is fastened, the seat will return to it’s previously set position.

Note: Some vehicle specifications require the ignition to be turned on.

See 56, VEHICLE INFORMATION AND SETTINGS MENU.

READ NEXT:

 Head restraints

Adjust the head restraint so that the top of the head restraint is above the centre line of the head. An incorrectly adjusted head restraint increases the risk of death or serious injury in the

 Integrated head restraints

Models with ‘sports’ seats have non adjustable and non removable head restraints.

 Rear seat access (coupe models)

The front seats tilt and power slide forwards for entry to and exit from the rear seats. Operation is controlled by a lever and switch. 1. Lift the locking lever and pivot the seatback forwards.

SEE MORE:

 Sulphur content

If your vehicle is fitted with a Diesel Particulate Filter (DPF) the maximum Sulphur content must not exceed 0.005%. Using an incorrect fuel will cause serious damage to the DPF. The Sulphur content of diesel used in Land Rover vehicles should not exceed 0.3% (3000 parts per million). In

 Rear Wheel Bearing

Special Tool(s) 204-250 Wheel bearing install and removal tool 204-305 Remover, Wheel Bearing 204-726 Remover/Installer, Wheel Bearing JLR-204-806 Support Tool, Wheel Knuckle JLR-204-809 Installer, Rear Wheel Bearing JLR-204-810 Installer, Rear Wheel Bearing General Equipment Copper Hammer Hydrau

© 2011-2025 Copyright www.rrevoque.org