Range Rover Evoque: Evaporator RHD

Removal

NOTES: The removal of this component involves cutting an aperture in the evaporator housing wall and cutting through the high and low pressure A/C lines. A service repair kit is supplied to cover this procedure.

Removal steps in this procedure may contain installation details.

All vehicles

1. Make the SRS system safe.

Refer to: Standard Workshop Practices (100-00 General Information, Description and Operation).

2. Refer to: Air Conditioning (A/C) System Recovery, Evacuation and Charging - GTDi 2.0L Petrol (412-00 Climate Control System - General Information, General Procedures).

Refer to: Air Conditioning (A/C) System Recovery, Evacuation and Charging - TD4 2.2L Diesel (412-00 Climate Control System - General Information, General Procedures).

3. Refer to: Steering Column (211-04 Steering Column, Removal and Installation).

4. Refer to: Plenum Chamber (412-01 Climate Control, Removal and Installation).

5. Refer to: Floor Console Upper Section (501-12 Instrument Panel and Console, Removal and Installation).

Vehicles with manual transmission

6. Refer to: Clutch Pedal - RHD (308-02 Clutch Controls - Vehicles With: M66 6-Speed Manual Transmission AWD, Removal and Installation).

All vehicles

7. Refer to: Brake Pedal and Bracket (206-06 Hydraulic Brake Actuation, Removal and Installation).

8.

9. Torque: 10 Nm

10. CAUTIONS: Make sure that all openings are sealed. Use new blanking caps.

Torque: 9 Nm

11. Torque: 4 Nm

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

22. CAUTION: Make sure that the area around the component is clean and free of foreign material.

Installation

1. Apply the foam strips from the service kit to the evaporator core.

2.

3.

4. NOTE: Install new O-ring seals.

Torque: 5 Nm

5. To install, reverse the removal procedure.

READ NEXT: