Range Rover Evoque: Front seat heaters

Press the relevant button to operate the required seat heater at high level. Three indicators will illuminate.

Press a second time to heat the seat at a medium level. Two indicators will illuminate.

Press a third time to heat the seat at the lowest level. One indicator will illuminate.

Press a fourth time to switch off.

Note: Seat heaters consume a great amount of battery power. They will operate only when the engine is running.

READ NEXT:

 Recirculation

- Press briefly to activate timed recirculation. The button indicator illuminates when recirculation is on. - Press and hold the button to activate latched recirculation. The button indicator wil

 Recirculation with pollution and humidity sensing

- Press the AUTO button briefly to activate timed recirculation. The AUTO LED will illuminate. The system automatically selects fresh and recirculated air dependent on pollution and cabin humidit

 Water deposits

The climate control system removes moisture from the air and deposits the excess water beneath the vehicle. Puddles may form but this is normal and is no cause for concern.

SEE MORE:

 Rear Wheelhouse Outer

Removal NOTES: It is necessary to remove the inner quarter panel to enable removal and installation of the rear wheelhouse outer. The rear wheelhouse outer is manufactured from mild steel. This method describes the LH rear wheelhouse outer, the RH side is similar. 1. The rear wheelhouse outer is

 Driver/Passenger Seat Module (DSM/PSM)

 CAUTION: Diagnosis by substitution from a donor vehicle is NOT acceptable. Substitution of control modules does not guarantee confirmation of a fault, and may also cause additional faults in the vehicle being tested and/or the donor vehicle  NOTES: If the control module or a component

© 2011-2025 Copyright www.rrevoque.org