Range Rover Evoque: Carpet and mats

Marks or stains can be removed by gentle scrubbing with a weak solution of soap and warm water.

For more stubborn stains a commercially available carpet cleaner should be used.

READ NEXT:

 Instrument panel,touch screen and audio system

Do not use upholstery cleaner on electrical equipment such as fascia switches. When cleaning around electrical equipment such as switches, ensure that fluids do not leak into any gaps around

 Wiper blade replacement

Fit only replacement wiper blades that are identical to the original specification. Before changing a wiper blade, the wiper arms must be set in the ‘service’ position as follows; Note: The Sm

 Fluid level checks

SEE MORE:

 B-Pillar Outer Panel

Removal NOTES: Within this procedure there are 2 different options depending on type of vehicle body. The b-pillar outer panel is manufactured from mild steel. The rocker panel butt joints must be MIG brazed due to the location of boron reinforcements. 1. The B-Pillar outer panel is replaced in

 Drive selector

P should normally be selected before switching off the engine. If any other gear is selected at turn off, the selector will move to P before retracting into the centre console. If the engine is switched off with N selected, the system will wait for 10 minutes before selecting P. This time dela

© 2011-2026 Copyright www.rrevoque.org