Range Rover Evoque: Condensation
Misting of lamp lenses can occur under some
atmospheric conditions. This will not affect the
performance of the lamps and will clear during
normal operation.
READ NEXT:
The headlamp beam pattern is suitable for
driving on either side of the road.
Headlamp levelling (halogen only)
Use the headlamp levelling control to account
for vehicle loading changes.
With the headlamps on, AFS will adjust the
beams when cornering to provide improved
illumination in the direction of travel.
When a direction indicator is activated at
speeds up to 40km/h (25mph),
SEE MORE:
Lighting control
1. With the headlamps on, push the control
away from the steering wheel to select high
beam. The instrument pack warning lamp
will illuminate.
Note: Do not use high beam where it may
distract other road users.
2. Pull the control towards the steering wheel
and release to f
CAUTION: If
the front airbags are deployed, the following components must be replaced:
Driver airbag module
Steering wheel
Passenger airbag module
Instrument panel
Fly leads (where applicable) connecting front airbag modules to SRS
harness
All seat belt buckle pre-tensioner
All occupied
© 2011-2026 Copyright www.rrevoque.org
