Range Rover Evoque: Selecting valet mode
Valet mode allows the vehicle to be driven, e.g.,
by a parking attendant, but leaves the tailgate
locked and restricts use of the touch screen.
This prevents access to telephone numbers,
navigation addresses and audio system
settings.
From the Home menu, select Valet:
Enter a four digit Personal identification
Number (PIN) (personally chosen). On
completion, touch the OK soft key.
If you wish to cancel the PIN, select Delete.
After entering the PIN, you will be prompted to
enter the PIN again. Enter the same PIN and
touch OK to confirm.
A pop-up screen is displayed, confirming your
vehicle is now in Valet mode.
READ NEXT:
The interior protection feature of the full alarm
system may be temporarily disabled via Alarm
sensors in the Vehicle Settings menu. See 56,
VEHICLE INFORMATION AND SETTINGS
MENU.
Note: If the in
In certain markets, a battery backed sounder is
fitted. This device will sound if it or the vehicle
battery is disconnected while the security
system is armed.
The tilt sensor detects any change to the
vehicle’s angle to the ground. When the alarm
is armed and the vehicle is double locked, any
change in the vehicle’s angle will activate the
tilt alar
SEE MORE:
Single locking secures the vehicle and prevents
the doors from being opened from outside. The
doors may still be unlocked and opened using
the interior door locks and release levers. In
this state, only the perimeter (exterior) alarm is
activated. When the vehicle is Single locked
and the alar
Removal
NOTES:
The inner quarter panel and wheelhouse is manufactured from mild steel.
The aid of a second technician is required to remove, offer up and align the
inner quarter panel and wheelhouse.
The service panel is not fully welded.
1. In this procedure, to make sure the vehicle is correctl
© 2011-2026 Copyright www.rrevoque.org
