Range Rover Evoque: Using the system

The system is operated using the remote control.

To release the remote from the docked position, press at the top of the remote (1) to unlatch it.

remote Do not attempt to pull the remote control out of its docked position.

Using the appropriate button (6) or (10) or on

Using the appropriate button (6) or (10) or on screen soft key (right or left) to select the required screen, will allow options to be set and selected.

Note: A help screen is available from each screen/menu. To view the help screen for guidance on the available functions and options, touch the question mark (?) icon.

Headphones

READ NEXT:

 Headphones

The volume control for each set of headphones is adjusted on the headphones. Press the channel selector button to cycle through available channels. Select the channel appropriate for the required

 Remote control battery

The remote control battery is automatically recharged while the remote is docked. The battery is not serviceable and should not be changed or removed by the user.

 Voice control

SEE MORE:

 Rear Bumper Mounting

Removal NOTE: The rear bumper mounting is manufactured from mild steel. 1. In this procedure, to make sure the vehicle is correctly aligned, it must be placed on an approved alignment jig. 2. The rear bumper mounting is replaced in conjunction with: Rear bumper cover Rear bumper Back panel 3.

 Headlamp washers

The optional headlamp power wash operates automatically with the windscreen wash and will operate only If the headlamps are switched on and there is sufficient washer fluid in the reservoir. Headlamp wash operates every fourth operation of the screen washers, provided the headlamps are still

© 2011-2025 Copyright www.rrevoque.org