Range Rover Evoque: Fuel consumption
The fuel consumption figures shown below have been calculated using a
standard testing
procedure (the new EC test procedure from Directive 99/100/EC), and produced in
accordance with
The Passenger Car Fuel Consumption (Amendment) Order 1996.
Under normal use, a vehicle’s actual fuel consumption figures may differ from
those achieved
through the test procedure, depending on driving technique, road and traffic
conditions,
environmental factors, vehicle load and condition.

READ NEXT:
The urban test cycle is carried out from a cold start and consists of a
series of accelerations,
decelerations and periods of steady speed driving and engine idling. The maximum
speed attained
d
The extra-urban test cycle is carried out immediately after the urban test.
Approximately half of the
test comprises steady speed driving, while the remainder consists of a series of
acceleration
The combined figure is an average of the urban and extra-urban test cycle
results, which has been
weighted to take account of the different distances covered during the two
tests.
For additional
SEE MORE:
Removal
CAUTION: Extreme cleanliness must be exercised when handling this
component.
NOTE: Some variation in the illustrations may occur, but the essential
information is always correct.
1. WARNING: Make sure to support the vehicle with axle stands.
Raise and support the vehicle.
2. Refer to: Eng
Control Diagram
NOTE: A = Hardwired
Battery
Battery Junction Box (BJB)
Fuel Pump Driver Module (FPDM)
Fuel pump delivery module
Engine Control Module (ECM)
Central Junction Box (CJB)
System Operation
OPERATION
The 2.0L GTDi fuel system uses a returnless fuel system. The fuel pump
operation
© 2011-2025 Copyright www.rrevoque.org
