Range Rover Evoque: Topping up the washer fluid

The washer reservoir supplies the front and rear screen washer jets and headlamp washer jets.

Check and top-up the reservoir level at least every week. Always top-up with screen washer fluid to prevent freezing.

Operate the washer switches periodically to check that the nozzles are clear and properly directed.

1. Clean the filler cap before removing to prevent dirt from entering the reservoir.

2. Remove filler cap.

3. Top-up the reservoir until the fluid is visible in the filler neck.

4. Replace filler cap.

READ NEXT:

 Blocked washer jets

Do not operate the washer jets during unblocking or adjustment. Windscreen washer fluid may cause irritation to the eyes and skin. Always read and observe the washer fluid manufacturers instru

 Vehicle battery

 Battery warning symbols

Do not allow any naked flames, or other sources of ignition near the battery as the battery may emit explosive gasses. Ensure that when working near, or handling the battery, suitable eye pr

SEE MORE:

 Air Conditioning

Component Location COMPONENT LOCATION High pressure line Low pressure servicing connection High pressure servicing connection Thermostatic expansion valve Evaporator Refrigerant pressure sensor Receiver/Drier Condenser A/C (air conditioning) compressor Low pressure line COMPONENT LOCATI

 Glass, Frames and Mechanisms - Component Location, System Operation and Component Description

Component Location COMPONENT LOCATION - DOOR MECHANISMS Passenger door glass motor Passenger door module Rear door glass motor Rear door module Rear fuse box Rear door glass motor Rear door module Driver door glass motor Driver door module CJB (central junction box) COMPONENT LOCATION -

© 2011-2025 Copyright www.rrevoque.org