Range Rover Evoque: Rear loadspace

travel in Never allow passengers to travel in the loadspace under any circumstances. All vehicle occupants should be seated correctly and wear a seat belt at all times when the vehicle is in motion.
Always ensure that objects carried within the vehicle are secured properly.

To remove the loadspace cover:

To remove the loadspace cover: 1. Release the two straps from the pins on the tailgate.

2. Pull the cover rearwards to release the retaining brackets on the edges of the cover from the pins on the loadspace side trim.

the Never place objects on top of the loadspace cover. During an accident or sudden manoeuvre, loose objects

Installation of the cover is the reverse of removal.

Storing the cover:

cover Do not store the loadspace cover loose in the vehicle.

1. Remove the loadspace cover.

2. Fold the rear seats forward.

3. Position the cover vertically in the vehicle approximately where the upright rear seat backrests are normally. The top surface of the cover must be facing forwards with the retaining brackets at the top.

4. Locate the retaining brackets onto the side trim pins.

5. Return the rear seats to the upright locked position.

READ NEXT:

 Roof racks

A loaded roof rack can reduce the stability of the vehicle, particularly when cornering and during cross winds. Driving off road with a loaded roof rack is not recommended. Fit only a roof ra

 Luggage anchor points

Luggage anchor points All items carried in the luggage area should be properly secured. 1. Bag hooks. - The bag hooks should only be used to secure light items such as shopping bags. 2. Lo

 Towing

SEE MORE:

 Tyre pressure monitoring (TPM) system

The TPM system provides a low pressure warning and does not re-inflate your tyres. Tyre pressures should be checked regularly using an accurate pressure gauge when cold. The TPM system can NOT register damage to a tyre. Regularly check the condition of your tyres, especially if the vehicle

 Rear Seat Backrest Cover 5-Door

Removal NOTES: This procedure covers the removal and installation of both rear seat backrests and the LH rear seat backrest cover. The RH rear seat backrest cover is similar. All notes and cautions must be followed strictly to avoid any chance of NVH or failure of the rear seat backrests. Some v

© 2011-2025 Copyright www.rrevoque.org