Range Rover Evoque: Vehicle position error

Under certain conditions it is possible for the vehicle position shown on screen to be incorrect. This may happen when: - Driving on a spiral ramp in a building.

- Driving on or beneath elevated roads.

- Two roads are close and parallel.

- The vehicle is transported to another destination.

- After the vehicle is rotated on a turntable.

- After vehicle battery disconnection.

READ NEXT:

 Navigation controls

Consists of two menu screens. Icons for the second menu are shown individually. Navigation controls See 104, TOUCH SCREEN OVERVIEW. 1. Move to other Navigation menu. 2. Cancels current route g

 Map split screen

Map split screen 1. TMC (Traffic Message Channel) information. 2. North is up. 3. Small compass display which always indicates North. 4. Next direction display. 5. Current vehicle position.

 Screen modes

Touch the screen mode selection button (12) to view a series of icons, each depicting a different screen mode (as detailed below). Touch the relevant icon to select the desired screen mode. Ful

SEE MORE:

 Drive selector

P should normally be selected before switching off the engine. If any other gear is selected at turn off, the selector will move to P before retracting into the centre console. If the engine is switched off with N selected, the system will wait for 10 minutes before selecting P. This time dela

 Front Seat Tilt Assembly

Removal WARNINGS: To avoid accidental deployment and possible personal injury, the backup power supply must be depleted before repairing or replacing any air bag supplemental restraint system (SRS) components. To deplete the backup power supply energy, disconnect the battery ground cable and wait

© 2011-2025 Copyright www.rrevoque.org