Range Rover Evoque manuals

Range Rover Evoque: Control Diagram

Land Rover Range Rover Evoque L538 (2011–2018) Service Manual / Instrumentation and Warning Systems / Parking Aid / Parking Aid - System Operation and Component Description / Control Diagram

NOTES:

A = Hardwired; N = Medium Speed CAN (controller area network) bus; D = High Speed CAN bus; T = Coaxial; O = LIN (local interconnect network) bus; P = Fibre Optic MOST; AD = NSTC; AE = LVDS;

Park assist is not available to all markets.

CONTROL DIAGRAM - SHEET 1 OF 3 - PARKING AID AND PARK ASSIST

Range Rover Evoque. Parking Aid

  1. TCM (transmission control module)
  2. CJB (central junction box)
  3. Integrated Control Panel (ICP)
  4. Integrated Audio Module (IAM)
  5. ABS (anti-lock brake system) module
  6. Audio power amplifier (Hi-Line only)
  7. Battery
  8. BJB (battery junction box)
  9. LH (left-hand) side parking aid sensor
  10. LH front outer parking aid sensor
  11. LH front inner parking aid sensor
  12. RH (right-hand) front inner parking aid sensor
  13. RH front outer parking aid sensor
  14. RHside parking aid sensor
  15. Electric power assisted steering rack
  16. Park distance control module
  17. RH rear outer parking aid sensor
  18. RH rear inner parking aid sensor
  19. LH rear inner parking aid sensor
  20. LH rear outer parking aid sensor
  21. RJB (rear junction box)
  22. Instrument cluster
  23. Wheel speed sensors
  24. Front audio speakers
  25. Rear audio speakers

CONTROL DIAGRAM - SHEET 2 OF 3 - REAR VIEW CAMERA SYSTEM (LOW-LINE)

Range Rover Evoque. Parking Aid

  1. Battery
  2. BJB
  3. CJB
  4. Touch Screen Display (TSD)
  5. Rear view camera

CONTROL DIAGRAM - SHEET 3 OF 3 - PROXIMITY CAMERA SYSTEM (HI-LINE)

Range Rover Evoque. Parking Aid

  1. Battery
  2. BJB
  3. RJB
  4. Front bumper camera
  5. Front bumper camera
  6. Proximity camera control module
  7. Mirror camera
  8. Mirror camera
  9. Rear view camera
  10. Touch Screen Display (TSD)
  11. CJB

READ NEXT:

 System Operation

PRINCIPLES OF OPERATION - PARKING AID Vehicles Fitted With Automatic Transmission If reverse ) is the first gear selected after the ignition is switched on, both the front (if fitted) and rear parkin

 Component Description

Parking Aid Module The parking aid module is located on the LH side of the luggage compartment, behind the 'C' pillar trim panel. The parking aid module has three connectors which provide for power

 Front Inner Parking Aid Sensor

Removal CAUTION: LH illustration shown, RH is similar. NOTES: Removal steps in this procedure may contain installation details. The ignition must be switched off. 1. WARNING: Make sure to support th

SEE MORE:

 Control Diagram, System Operation

Control Diagram NOTE: A = Hardwired; D = High Speed CAN Bus; O = Local Interconnect Network (LIN) Bus CONTROL DIAGRAM - SHEET 1 OF 2 Battery Starter motor fuse Battery Junction Box (BJB) Starter motor Generator Transmission Control Module (TCM) Cooling fan control module Air Conditioning

 Stop/start (manual transmission only)

The Stop/Start system has been designed to improve fuel efficiency. The system is automatically activated when the ignition is switched on. When the engine has been stopped by the stop/start system, the ECO icon will illuminate. When the vehicle comes to a stop, neutral is selected and the

© 2011-2025 Copyright www.rrevoque.org