Range Rover Evoque: Easy entry/exit
Land Rover Range Rover Evoque L538 (2011–2018) Owner's Manual / Front seats / Easy entry/exit
When Easy entry/exit is configured, the driver’s seat will automatically lower when the ignition is switched off and the door release lever is used. Upon returning to the vehicle, when the driver’s door is closed and the seat belt is fastened, the seat will return to it’s previously set position.
Note: Some vehicle specifications require the ignition to be turned on.
See 56, VEHICLE INFORMATION AND SETTINGS MENU.
READ NEXT:
Head restraints
Adjust the head restraint so
that the
top of the head restraint is above the
centre line of the head. An incorrectly
adjusted head restraint increases the
risk of death or serious injury in the
Integrated head restraints
Models with ‘sports’ seats have non adjustable
and non removable head restraints.
Rear seat access (coupe models)
The front seats tilt and power slide forwards for
entry to and exit from the rear seats. Operation
is controlled by a lever and switch.
1. Lift the locking lever and pivot the seatback
forwards.
SEE MORE:
Engine Timing
Special Tool(s)
303-1565
Locking Tool, Camshaft
308-511
Installer, Transmission Output Shaft Seal
JLR-303-1594
Locking Tool, Driveplate
JLR-303-748
Locking Tool, Crankshaft
Activation
1.
2. Install the special tool.
Special Tool(s): JLR-303-748
3. Rotate the engine clockwise until the crankshaft
Heater Mats
Principles of Operation
Heated seats incorporate heater elements in the cushion and the backrest of
the seat. Each cushion heater element has a
thermal sensor, which supplies a feedback temperature signal to the related seat
heater module. The backrest heater
elements do not have a thermal sensor,
© 2011-2025 Copyright www.rrevoque.org
