Range Rover Evoque: Passenger Seat Cushion Vehicles With: Sports Seats

Land Rover Range Rover Evoque L538 (2011–2018) Service Manual / Body and Paint / Seating / Passenger Seat Cushion Vehicles With: Sports Seats

Removal

NOTE: Removal steps in this procedure may contain installation details.

All vehicles

1. Disconnect the battery ground cable.

Refer to: Specifications (414-01 Battery, Mounting and Cables, Specifications).

2. Make the SRS system safe.

Refer to: Standard Workshop Practices (100-00 General Information, Description and Operation).

3. Refer to: Front Seat Cushion Cover - Vehicles With: Sports Seats (501-10 Seating, Removal and Installation).

4.

Range Rover Evoque. Passenger Seat Cushion Vehicles With: Sports Seats

Vehicles with heated front seats

5.

Range Rover Evoque. Passenger Seat Cushion Vehicles With: Sports Seats

All vehicles

6.

Range Rover Evoque. Passenger Seat Cushion Vehicles With: Sports Seats

Installation

1. CAUTION: Make sure the component is aligned as shown.

Range Rover Evoque. Passenger Seat Cushion Vehicles With: Sports Seats

2. CAUTION: Make sure the component is aligned as shown.

Range Rover Evoque. Passenger Seat Cushion Vehicles With: Sports Seats

3. To install, reverse the removal procedure.

Passenger Seat Cushion Heater Mat Vehicles With: Sports Seats

Removal

NOTE: Removal steps in this procedure may contain installation details.

1. Disconnect the battery ground cable.

Refer to: Specifications (414-01 Battery, Mounting and Cables, Specifications).

2. Make the SRS system safe.

Refer to: Standard Workshop Practices (100-00 General Information, Description and Operation).

3. Refer to: Front Seat Cushion Cover - Vehicles With: Sports Seats (501-10 Seating, Removal and Installation).

4. NOTE: Some variation in the illustrations may occur, but the essential information is always correct.

Range Rover Evoque. Passenger Seat Cushion Heater Mat Vehicles With: Sports Seats

5.

Range Rover Evoque. Passenger Seat Cushion Heater Mat Vehicles With: Sports Seats

Installation

1. To install, reverse the removal procedure.

READ NEXT:

 Glass, Frames and Mechanisms

 Glass, Frames and Mechanisms - Component Location, System Operation and Component Description

Component Location COMPONENT LOCATION - DOOR MECHANISMS Passenger door glass motor Passenger door module Rear door glass motor Rear door module Rear fuse box Rear door glass motor Rear door m

 Front/Rear Door Window Glass

Front Door Window Glass Special Tool(s) 501-114 Release Lever, Door Glass Removal NOTE: Removal steps in this procedure may contain installation details. 1. Torque: 1 Nm 2. Special Tool(s): 501-114

SEE MORE:

 Selecting valet mode

Valet mode allows the vehicle to be driven, e.g., by a parking attendant, but leaves the tailgate locked and restricts use of the touch screen. This prevents access to telephone numbers, navigation addresses and audio system settings. From the Home menu, select Valet: Enter a four digit Perso

 Brake System - General Information

Brake System Bleeding CAUTION: Brake fluid will damage paint finished surfaces. If spilled, immediately remove the fluid and clean the area with water. NOTES: Bleeding of the complete brake system must be carried out using Land Rover approved diagnostic equipment. Where only the primary or seconda

© 2011-2025 Copyright www.rrevoque.org