Range Rover Evoque manuals

Range Rover Evoque: Direction indicator and side lamp bulbs

Land Rover Range Rover Evoque L538 (2011–2018) Owner's Manual / Maintenance / Direction indicator and side lamp bulbs

Removing the nearside bulbs;

To gain more room for accessibility, follow

To gain more room for accessibility, follow steps 1 and 2 for moving the nearside headlamp unit.

1. At the back of the headlamp unit, remove the indicator bulb housing. Turn it counter clockwise to release.

2. To remove the side lamp bulb housing.

Turn it counter clockwise to release.

Removing the offside bulbs;

To gain more room for accessibility, follow the

To gain more room for accessibility, follow the process for moving the offside headlamp unit.

1. At the back of the headlamp unit, remove the indicator bulb housing. Turn it counter clockwise to release.

2. To remove the side lamp bulb housing.

Turn it counter clockwise to release.

READ NEXT:

 Rear lamp bulbs

1. Remove the two fixings. 2. Direction indicator. 3. Reversing lamp Turn the relevant bulb holder counter clockwise and pull to remove from the lamp unit. Grip the holder then press the bulb i

 Rear fog lamp

Access to the rear fog lamp requires special tools and should be undertaken only by a qualified technician. If in doubt, consult your Land Rover Dealer/Authorised Repairer.

 Cleaning the exterior

Remove any heavy deposits of mud and dirt with a hose before washing the vehicle. Never aim a hose water jet directly at the engine air intake, heater air intakes, body seals or at any compone

SEE MORE:

 Headphones

The volume control for each set of headphones is adjusted on the headphones. Press the channel selector button to cycle through available channels. Select the channel appropriate for the required screen. Note: These headphones are not intended for use by the driver or outside the vehicle. Not

 Starting System - GTDi 2.0L Petrol

Starting System - Component Location COMPONENT LOCATION Solenoid 12V supply from battery Solenoid power supply from Battery Junction Box (BJB) Starter motor Pinion gear Starting System - Overview OVERVIEW The starter motor is rated as 1.3 kW and is a Denso conventional design with the motor

© 2011-2025 Copyright www.rrevoque.org