Range Rover Evoque: Front Stabilizer Bar Bushing

Removal

NOTES:

Some variation in the illustrations may occur, but the essential information is always correct.

Removal steps in this procedure may contain installation details.

1. WARNING: Make sure to support the vehicle with axle stands.

Raise and support the vehicle.

2. Remove the front wheels and tires.

Refer to: Wheel and Tire (204-04 Wheels and Tires, Removal and Installation).

3. WARNING: Make sure that new nuts are installed.

Torque:

Stage 1: 175 Nm
Stage 2: 175 Nm

Range Rover Evoque. Front Suspension

Installation

1. To install, reverse the removal procedure.

Front Stabilizer Bar Link

Removal

NOTES:

Some variation in the illustrations may occur, but the essential information is always correct.

Removal steps in this procedure may contain installation details.

1. WARNING: Make sure to support the vehicle with axle stands. Raise and support the vehicle.

2. Refer to: Wheel and Tire (204-04 Wheels and Tires, Removal and Installation).

3. WARNING: Make sure that new nuts are installed.

CAUTION: Use an Allen key to prevent the ball joint rotating whilst removing the nut.

Torque: 60 Nm

Range Rover Evoque. Front Suspension

Installation

1. To install, reverse the removal procedure.

READ NEXT:

 Wheel Knuckle

Special Tool(s) 205-754A Splitter, Ball Joints 205-857 Remover, Halfshaft JLR-204-804 Lever, Wheel Knuckle Removal CAUTIONS: Nuts and bolts must be tightened with the weight of the vehicle on the sus

 Front Shock Absorber Vehicles Without: Dynamic Suspension

General Equipment Suspension Spring Compressor Vise Removal WARNINGS: Make sure the spring compressor Safe Working Load (SWL) meets or exceeds the spring rating quoted in the Specifcations sectio

 Shock Absorber and Spring Assembly Vehicles Without: Dynamic Suspension

Special Tool(s) 205-754A Splitter, Ball Joints 205-857 Remover, Halfshaft JLR-204-804 Lever, Wheel Knuckle General Equipment Transmission jack Wooden Block Removal CAUTION: Nuts and bolts must be

SEE MORE:

 Changing the display

Changing the display Press the TRIP button on the end of the left column stalk repeatedly to display the trip data in the following order: - Date and odometer. - Trip distance. - Average speed. - Average fuel consumption. - Instantaneous fuel economy. - Range. - Blank. To reset the disp

 Passenger Seat Cushion Heater Mat

Removal WARNINGS: To avoid accidental deployment and possible personal injury, the backup power supply must be depleted before repairing or replacing any air bag supplemental restraint system (SRS) components. To deplete the backup power supply energy, disconnect the battery ground cable and wait

© 2011-2025 Copyright www.rrevoque.org