Range Rover Evoque: Lumbar Assembly Vehicles With: Sports Seats

Removal

NOTE: Removal steps in this procedure may contain installation details.

1. Make the SRS system safe.

Refer to: Standard Workshop Practices (100-00 General Information, Description and Operation).

2. Disconnect the battery ground cable.

Refer to: Specifications (414-01 Battery, Mounting and Cables, Specifications).

3. Refer to: Side Air Bag Module - Vehicles With: Sports Seats (501-20B Supplemental Restraint System, Removal and Installation).

4.

Range Rover Evoque. Lumbar Assembly Vehicles With: Sports Seats

5.

Range Rover Evoque. Lumbar Assembly Vehicles With: Sports Seats

6.

Range Rover Evoque. Lumbar Assembly Vehicles With: Sports Seats

7.

Range Rover Evoque. Lumbar Assembly Vehicles With: Sports Seats

Installation

1. To install, reverse the removal procedure.

Front Seat Tilt Assembly Vehicles With: Sports Seats

Removal

NOTE: Removal steps in this procedure may contain installation details.

1. Make the SRS system safe.

Refer to: Standard Workshop Practices (100-00 General Information, Description and Operation).

2. Disconnect the battery ground cable.

Refer to: Specifications (414-01 Battery, Mounting and Cables, Specifications).

3. Refer to: Side Air Bag Module - Vehicles With: Sports Seats (501-20B Supplemental Restraint System, Removal and Installation).

4.

Range Rover Evoque. Front Seat Tilt Assembly Vehicles With: Sports Seats

5.

Range Rover Evoque. Front Seat Tilt Assembly Vehicles With: Sports Seats

6. NOTE: Repeat the procedure for the other side.

Range Rover Evoque. Front Seat Tilt Assembly Vehicles With: Sports Seats

7.

Range Rover Evoque. Front Seat Tilt Assembly Vehicles With: Sports Seats

8.

Range Rover Evoque. Front Seat Tilt Assembly Vehicles With: Sports Seats

9.

Range Rover Evoque. Front Seat Tilt Assembly Vehicles With: Sports Seats

Installation

1. To install, reverse the removal procedure.

READ NEXT:

 Front Seat Cushion Cover Vehicles With: Sports Seats

Removal NOTE: Removal steps in this procedure may contain installation details. All vehicles 1. Prior to carrying out the step by step procedure below, Steps 2 and 3 must be followed for knowledge on

 Driver Seat Cushion Vehicles With: Sports Seats

Removal NOTE: Removal steps in this procedure may contain installation details. All vehicles 1. Disconnect the battery ground cable. Refer to: Specifications (414-01 Battery, Mounting and Cables, Spe

 Passenger Seat Cushion Vehicles With: Sports Seats

Removal NOTE: Removal steps in this procedure may contain installation details. All vehicles 1. Disconnect the battery ground cable. Refer to: Specifications (414-01 Battery, Mounting and Cables, Spe

SEE MORE:

 Engine Control Module (PCM)

Engine Control Module 2.2L - I4 - DW12c TD4  CAUTION: Diagnosis by substitution from a donor vehicle is NOT acceptable. Substitution of control modules does not guarantee confirmation of a fault, and may also cause additional faults in the vehicle being tested and/or the donor vehicle.  

 Wheel changing

WARNING - THAT NO PERSON SHOULD PLACE ANY PORTION OF THEIR BODY UNDER A VEHICLE THAT IS SUPPORTED BY A JACK. Position the jack from the side of the vehicle, in line with the appropriate jacking point. Jack up the vehicle using only the jacking points described, or damage to the vehicle

© 2011-2025 Copyright www.rrevoque.org