Range Rover Evoque: Switching off the engine

Before switching off the engine, ensure that the vehicle is parked safely with the park brake applied.

1. Select P for automatic transmission, or neutral for manual transmissions.

Note: If any other gear is selected at switch off, the rotary selector will automatically move to P before retracting into the centre console.

2. Press the START/STOP button.

Note: The park brake will apply automatically if it has not already been applied.

READ NEXT:

 Switching off the engine with the vehicle moving

It is not advisable to switch off the engine while the vehicle is moving. However, should such a situation arise, then the following procedure applies. - Press and hold the engine START/STOP

 Rolling re-start

If the engine is switched off while the vehicle is moving, a rolling re-start can be initiated. Automatic transmission - select neutral (N) and then press the engine START/STOP button. When the en

 Keyless start backup

If the vehicle has been unlocked using the emergency key blade or the Smart Key is not detected by the vehicle, it will be necessary to use the keyless start backup to disarm the alarm and start t

SEE MORE:

 Manual Transmission AWD

Component Location COMPONENT LOCATION Manual transmission Selector lever assembly Overview OVERVIEW The M66EH50 manual transmission is a 6 speed unit manufactured by Getrag-Ford in Cologne, Germany. The transmission is a highly compact 4 shaft design, incorporating the front final drive gear,

 System fault

If a fault with one of the radar sensors is detected, an amber warning indicator dot is displayed in the exterior mirror and the message BSM not available is displayed in the message centre. Note: Even if the detected fault only affects the radar sensor on one side of the vehicle, the whole s

© 2011-2025 Copyright www.rrevoque.org